Model 5400-HS Tuber

  • 3″ Flame cut side frames
  • All gearbelt driven drive drain
  • 60 HP high torque AC Motor and Drive
  • HB photo-electric eye system
  • Extremely accurate no change gear transmission
  • Very high speed capabilities, up to 400 tubes per minute
  • One man type tube accumulator
  • Easy load, plying splice type roll stands with laybacks
  • Machine has many standard features such as thumb notch cutter, I.D. printer, seam paste system, interply pasting, laminator, anti-skid unit, etc.
  • OSHA approved safety guards

 

 

  • 1. Third stage tube stacking conveyor with extendable stack table
  • 2. Second stage tube stacking conveyor
  • 3. First stage tube stacking conveyor with drop bar
  • 4. Tube ejector unit
  • 5. Operator’s control console
  • 6. Upper and lower tear off rolls
  • 7. Upper and lower cut off and breaker bar segments
  • 8. Upper and lower draw rolls
  • 9. Tube break over roll
  • 10. Tube formers and former hardware
  • 11. Tube length transmission, no change gears required
  • 12. Correcting differential
  • 13. 60 HP AC Main drive motor
  • 14. Former width adjustment unit
  • 15. Low friction former heel rollers
  • 16. Thumb notch and undervalve unit
  • 17. Seam glue section
  • 18. Seam glue skip feature control box
  • 19. Ply merging rolls
  • 20. Motorized longitudinal register rolls
  • 21. I.D. Printer unit
  • 22. Crosspaster tower
  • 23. Overall pin hole ventilating tower
  • 24. All pneumatic web guide tower
  • 25. Ply seperator unit
  • 26. E-Stop web brake
  • 27. Paper roll brakes
  • 28. Paper roll stands
  • 29. Pneumatic paper roll laybacks
  • 30. Walkways
  • 31. Motorized anti-skid unit